RAM HyperX FURY DDR4 RGB 16GB Kit (2x8GB) 3200MHz CL16 288-Pin

Deskripsi

RAM HyperX FURY DDR4 RGB 16GB Kit (2x8GB) 3200MHz CL16 288-Pin

HX432C16FB3AK2/16
16GB (8GB 1G x 64-Bit x 2 pcs.)
DDR4-3200 CL16 288-Pin DIMM Kit

DESCRIPTION
HyperX HX432C16FB3AK2/16 is a kit of two 1G x 64-bit (8GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total kit capacity is 16GB. Each module has been tested to run at DDR4-3200 at a low latency timing of 16-18-18 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

FACTORY TIMING PARAMETERS

• Default (JEDEC): DDR4-2400 CL17-17-17 @1.2V
  
• XMP Profile #1: DDR4-3200 CL16-18-18 @1.35V
  
• XMP Profile #2: DDR4-3000 CL15-17-17 @1.35V

SPECIFICATIONS
CL(IDD) : 17 cycles
Row Cycle Time (tRCmin) : 45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin) : 350ns(min.)
Row Active Time (tRASmin) : 32ns(min.)
UL Rating : 94 V – 0
Operating Temperature : 0o C to +70o C
Storage Temperature : -40o C to +85o C

FEATURES

• Power Supply: VDD = 1.2V Typical
  
• VDDQ = 1.2V Typical
  
• VPP = 2.5V Typical
  
• VDDSPD = 2.2V to 3.6V
  
• On-Die termination (ODT)
  
• 16 internal banks; 4 groups of 4 banks each
  
• Bi-Directional Differential Data Strobe
  
• 8 bit pre-fetch
  
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
  
• Height 1.624” (41.24mm), w/heatsink